Prv. Maintenance - Cox Dry-Heat - Rapid Heat 6000
Preventative Maintenance Manuals - Cox Dry-Heat
MAINTENANCE – SERVICE
The Cox sterilizer is designed for minimum and easy service. It is constructed of high quality stainless steel, which may be cleaned with mild soap and a damp cloth or any non-abrasive stainless steel cleaner. Unit can be externally disinfected with the disinfectant of your choice.
All of the common components used in the sterilizer’s construction are long life, heavy-duty parts that require no maintenance. If anything needs to be replaced, an authorized service representative should be called or call Sterilizer/Autoclave at (727) 330-7023.
Any failure in performance will be signaled by an error code. If one of the following error codes appears, unplug the sterilizer, wait several seconds and then plug it back in. This will reestablish the error detect logic and will eliminate false error codes that may occur. If the error code persists, call your Sterilizer/Autoclave Technician (727) 330-7023.
E-10 EPROM failure
E-11 RAM failure
E-12 Switch failure
E-13 Timing failure
E-20 Open probe
E-30 Over heat
E-31 Under heat